Media Blasting Masking Tapes, Caps, Plugs

For steel shot or other aggressive media, this multi-layer glass cloth / aluminum / silicone tape is a top one to consider.

No hard metal mask? No problem! Stainless steel tape can be wrapped around parts (even multiple times!) to offer excellent media blasting protection.

With a layer of aluminum foil and glass cloth, this tape will handle a wide range of media blasting masking needs.

A 7 mils thick fiberglass cloth tape that can withstand a lot of aluminum oxide and other moderate media blasting operations.

Aluminum foil tape provides conformable protection during light to moderate media blasting.

For light to moderate media blasting needs, this vinyl tape goes on quickly, conforms to irregular shapes and is low-cost.

EPDM rubber has a higher abrasion resistance than silicone; use these plugs to mask blind holes during media blasting for optimal protection.

EPDM caps mask studs, pines and tubes up to 2" in diameter during light to moderate media blasting operations.

Mask thru-holes up to 1" in length during media blasting with EPDM pull plugs to protect threads.

Choose a tapered plug, straight wall caps, pull plugs or custom-mixed plugs/caps kit of EPDM rubber parts for media blasting masking.

Media Blasting Masking