Plating Masking
Find and buy plating masking tapes, tape die cuts, caps and plugs.
Recommended Products: Plating Masking
Red Polyester Plating Tape
A thin (1 mil) polyester film with a thick (3 mils) red adhesive tape for the ultimate in plating masking stop off.
View productCircuit Plating Tape
Electroplating tape designed especially for masking of circuit boards; has unique adhesive that excels at this application.
View productVinyl Tape
Highly-conformable, low cost and available in many colors, adhesive vinyl tapes perform well in plating operations below 140F.
View productNon-Adhesive Vinyl Tape
A yellow vinyl film with no adhesive added; it is often used to wrap plating racks at lower cost than adhesive tapes.
View productLead Foil Tape, 5 mils w/liner
A superior lead foil masking tape with a 275F acrylic-based adhesive for electroplating masking operations, especially hard chrome.
View productAluminum Foil Tape, 3 mils w/liner
Dead soft aluminum foil tape on liner for wrinkle-free unwinding and precise masking placement before plating.
View productAluminum Foil Tape, 3 mils no liner
A self-wound aluminum foil tape with a strong acrylic adhesive for tough plating masking projects.
View productGreen Polyester Tape
A masking tape used across a wide range of metal finishing operations that works well for many plating applications.
View productSilicone Tapered Plugs
Silicone tapered plugs are ideal for masking blind and some thru-holes (at each end) for many plating needs.
View productSilicone Tapered Plugs with Handle
Silicone tapered plugs with handle are faster to place and remove; also aid in masking hard-to-reach holes.
View productSilicone Pull Plugs
Silicone pull plugs quickly mask threaded and non-threaded thru-holes up to 1" length during electroplating.
View productSilicone Flanged Pull Plugs
Flanged pull plugs work just like pull plugs, but the flange also masks the all-important first-thread and sometimes small chamfers.
View productSilicone Straight Wall Caps
Masking studs, pins or tubes up to 2" in diameter during plating is fast and precise with silicone straight-walled caps.
View productLead Foil Tape Disks, 5 mils on liner
Lead foil tape die cut into circles at various diameters for fast, precise masking of round areas during plating.
View productAluminum Foil Tape Disks, 3 mils on liner
Aluminum foil tape die cut into circles at various diameters for fast, precise masking of round areas during plating.
View productGreen Polyester Tape Disks
Green polyester tape die cut into circles at various diameters for plating masking when a metal tape is not well-suited.
View productEPDM Tapered Plugs
When silicone rubber tapered plugs cannot be used, EPDM rubber is a good alternative with plugs in the same sizes and shapes.
View productEPDM Pull Plugs
When silicone rubber pull plugs cannot be used, EPDM rubber is a good alternative for thru-holes of 1" or less.
View productEPDM Straight Wall Caps
Masking studs, pins or tubes up to 2" in diameter during plating with EPDM caps is preferred when silicone cannot be used.
View productLined Green Polyester Tape
Create one-off custom die cuts, die cut 'kits' with multiple parts and/or short-run quantities with lined green polyester tape on your plotter cutter.
View productKits
Silicone or EPDM plugs and caps kits provide fast identification of the right plug or cap to use in masking during plating.
View product
