Powder Coating Masking
Find and buy powder coating masking tapes, tape die cuts, caps and plugs.
Recommended Products: Powder Coating Masking
Green Polyester Tape
Industry-standard, 400F high temperature green polyester masking tape for powder coating.
View productOrange Polyester Tape
Orange polyester tape withstands 425F at 60 minutes; costs less than glass cloth or polyimide tapes.
View productGlass Cloth Tape
Glass cloth tape does not shrink, even up to 500F; excellent removal for thick powders.
View productPolyimide Tape
500F temp rating with 1 mil profile for excellent edge lines at high heat.
View productBlue Polyester Tape
Thinner powder coating masking tape for moderately curved surfaces and low profile, clean edge lines.
View productGreen Polyester Masking Tape
3M's 8992 green polyester, high temperature powder coating masking tape for temps up to 400F.
View productSilicone Tapered Plugs
Silicone tapered plugs are the most-often-used plug for powder coating masking.
View productSilicone Tapered Plugs with Handle
Silicone tapered plugs with a handle are easier to grab for faster insertion and removal.
View productSilicone Pull Plugs
Pull plugs mask threaded and non-threaded thru-holes up to 1" in length during powder coating.
View productSilicone Flanged Pull Plugs
A pull plug variant with a flange to mask the first thread or small chamfers at thread lead-in.
View productSilicone First Thread Masking Plugs with Handle
Ideal for blind threaded holes that require first threads to be coating-free.
View productSilicone Flangeless Plugs
Ribbed design with a handle; ideal for threaded holes or where twisting plugs into place is required.
View productSilicone Hollow Tapered Plugs
Larger plugs with hollow narrow end; better for higher friction-fit needs. Larger sizes cost less than solid plugs.
View productSilicone Tapered Flange Plugs
For masking concentric circles around holes (often for grounding purposes) during powder coating.
View productSilicone Multi-Flange Plugs
A unique plug that masks difficult holes or large chamfered areas leading into smaller threaded blind holes.
View productGreen Polyester Tape Disks
Pre-cut 400F green polyester tape disks on release liner for quick masking of circular areas.
View productGlass Cloth Tape Disks
Pre-cut 500F glass cloth tape disks on release liner to mask thick powder coated round areas.
View productPolyimide Tape Disks
Precut 500F polyimide tape disks for high temperature masking needs during powder coating.
View productSilicone Straight Wall Caps
Mask threaded and non-threaded studs, pins or tubes during powder coating with silicone caps.
View productSilicone Flange Caps
When a stud or pin requires a concentric circle around the base, flange caps are the solution.
View productSilicone Expandable Caps
Caps with a unique set of ribs inside that allow mask to expand at the opening; useful for multiple thread sizes or when a specific straight wall cap size does not exist.
View productLined Green Polyester Tape
400F green polyester tape on release liner for creating one-off or small quantities of custom die cuts in-house with your plotter-cutter machine.
View productSilicone Tubing
For masking longer pins or tubes that standard caps are too short to cover, cut tubing to length that is needed.
View productKits
24 slots of standard or mix-n-match plugs and caps kits for testing masking plug/cap sizing or for small quantity masking needs.
View product
